Security check

"Proactive – Fast – Safe at every inspection step."

CARRY-ON LUGGAGE

See the map of the domestic security check area.

See the map of the international security check area.

You need to follow the security screening process as follows:

Prepare your ID and boarding pass for inspection.
Place your carry-on luggage on the conveyor belt.
Remove outerwear (e.g., coats, sweaters, trench coats), hats, and shoes, then place them in the tray along with other carry-on items.
Take out all electronic devices from your luggage and place them in a separate tray for inspection. Valuable personal items such as rings, jewelry, and watches should be kept inside the luggage with zippers closed before scanning.
Walk through the metal detector. Note that you may need to undergo an enhanced security check if required.

Step 1: Prepare documents

Prepare your ID and boarding pass for inspection

Step 2: Place luggage on conveyor

Place your carry-on luggage on the conveyor belt

Step 3: Remove personal items

Remove outerwear, hats, and shoes, place them in the tray with other carry-on items

Step 4: Check electronic devices

Take out all electronic devices from luggage and place them in a separate tray

Step 5: Walk through metal detector

Walk through the metal detector and follow enhanced security procedures if necessary

LIST OF PROHIBITED ITEMS

Below is the list of items prohibited in carry-on and checked luggage:

Note: Refer to the prohibited and restricted items list before entering restricted areas or boarding the aircraft via this link

OTHER INFORMATION

CUSTOMS PROCEDURES

LOUNGE SERVICES

MEDICAL SERVICES

ELECTRIC VEHICLE SERVICES

BOARDING

FREQUENTLY ASKED QUESTIONS

Common questions about security screening

What documents do I need to prepare when going through security?

You should have your boarding pass, valid ID, and any additional documents ready to present to the security staff.

Are there any restrictions for carry-on luggage?

Yes. Certain items are prohibited in carry-on luggage, such as sharp objects, improperly packed liquids, damaged batteries, or flammable/explosive substances.
You should carefully check the restricted or prohibited items list before heading to the airport to avoid being denied boarding.

Do I need to remove shoes and jackets during screening?

Yes, you may be asked to remove shoes, jackets, hats, and any metal items for inspection if necessary.

What should I pay attention to with electronic devices?

Laptops, tablets, and cameras should be taken out of bags and placed in separate trays. Power banks and lithium batteries must also be screened separately.

How long does the security screening process take?

Typically 5–10 minutes if well prepared. During peak hours it may take longer, so arrive early to avoid missing your flight.